What Does Bacteriostatic Mean?

What Does Bacteriostatic Mean

The world has so many bacteria that, if they were stacked on top of each other, they’d stretch into space for 10 billion light years.

There have been many ways to control them. One common option is using bacteriostatic agents.

What does bacteriostatic mean? How does it apply to the HCG diet? Read on to learn the answer.

Disclaimer: The FDA has not approved HCG for weight loss and there is no substantial evidence that HCG is effective in the treatment of obesity. The following information is not medical advice. Seek the advice of a medical professional before starting any medication or diet program.

What Does Bacteriostatic Mean?

Bacteriostatic substances affect and inhibit the cell growth of bacteria.

They do this without necessarily killing it. The effect is reversible because the bacteria will grow again once the bacteriostatic agent is removed.

What Doesn’t Bacteriostatic Mean?

Bacteriostatic is often confused with other terms such as bactericidal and sterile. Knowing the difference helps you understand what you’re using while on the HCG diet.

What does bactericidal mean? Bactericidal substances directly kill bacteria. They attack its internal structures until it dies off. The effect is irreversible.

What does sterile mean? Sterile substances don’t have any bacteriostatic, antimicrobial, or other protective agents. Sterile salt water can be used for:

  • Wound cleaning
  • Contact lens rinsing
  • Certain injections for one-time use

What Is Bacteriostatic Water?

Once you’ve answered the question “what does bacteriostatic mean”, you may wonder how it applies to the bacteriostatic water in your HCG Mixing Kit.

Bacteriostatic water contains a bacteriostatic agent. The most common is known as benzyl alcohol (BnOH). It’s a colorless liquid with low toxicity and vapor pressure.

It’s primarily used as a solvent to dilute or dissolve medications for injections. It protects against contamination while they’re being prepared and stored.

Bacteriostatic water lasts up to 28 days after the first use of the vial. Refrigerate after opening.

Where Can I Find Instructions for Mixing HCG With Bacteriostatic Water?

Starting the HCG diet requires the right tools. Along with your HCG, you’ll need:

  • Bacteriostatic water
  • Large syringe with needle for mixing
  • Alcohol prep pads
  • Sterile-capped glass vials
  • Syringes with needles for injections

Get a set of basic HCG mixing instructions. They explain how to draw bacteriostatic water back and forth into the syringes and mixing vials. This protects you from bacteria during each injection.

Where Can I Get My HCG Supplies?

Bacteriostatic water is necessary for mixing HCG, but what does bacteriostatic mean? It refers to substances such as benzyl alcohol that inhibit the growth of bacteria.

HGCSupplies.com, LLC was the first company ever to offer HCG Mixing Kits online. Our line of products also includes storage vials, Bacteriostatic Water, injection syringes, mixing syringes, syringe filters, ampoule breakers, and alcohol prep pads. We offer low-cost shipping with no hidden fees.

We’re the only company that provides free dosage instructions and reference guides. Contact us for support on your HCG Diet Protocol.

What Is Bacteriostatic Water and Why Is It Used?

What Is Bacteriostatic Water and Why Is It Used

Tap water can become contaminated with a wide variety of germs. Common bacteria types include Legionella, Pseudomonas aeruginosa, and Naegleria fowleri. These cause lung infections, skin infections, and brain infections respectively.

Because these types of germs exist, a medical aqueous injection usually contains some form of “clean” water. One of the options for this purpose is bacteriostatic water.

What is bacteriostatic water? Read on to find out.

What Is Bacteriostatic Water?

Bacteriostatic water (BSW) is a solution that is free from viruses, bacteria, and other harmful microorganisms. It contains sterile water (water free of foreign substances) and one type of several different bactericidal solutions (BCSs). These are substances that inhibit bacteria growth.

The most commonly used BCS in BSW is benzyl alcohol. With this, you can use BSW for around a month before there’s a risk of bacterial infection.

How Is Bacteriostatic Water Used?

BSW is often used in aqueous injections. These are intravenous injections that use water as a diluent or solvent. That is, the water in the solution dilutes or dissolves medications before they’re injected into the body.

Healthcare workers prefer to use BSW for these because it’s better at inhibiting bacterial growth than sterile water. In addition, workers can dose patients multiple times using a single vial. This makes the resulting aqueous injection solution far more practical.

Examples of medicines dissolved in these solutions include vaccines and insulin. It’s also great for mixing with Human Chorionic Gonadotropin (HCG). This is the hormone that you use with the mixing kits that we supply.

Using Bacteriostatic Water with the HCG Diet

Our mixing kits contain BSW. Once you purchase HCG powder, you can use BSW to dissolve it before injecting the solution. Here are the steps that you should take:

Put Out the Materials

You need to put out your mixing materials in a sterile environment. Wash your hands and dry them thoroughly.

Open the HCG Ampoule

Clean the top of the HCG glass ampoule with alcohol. Snap the top of the ampoule at the narrowest part. Break it as you would a wooden match or toothpick.

Sterilize the Vials

Get an alcohol pad. Use it to sterilize the rubber tops of the 30cc BSW vial and the empty glass vial.

Inject BSW

Draw less than 1 cc of BSW into a 10cc mixing syringe. Inject this into the empty sterile glass vial.

Then, draw another 1cc and inject it into the HCG ampoule. Let the powder dissolve and swirl the ampoule gently. Draw the mixture back and inject it into the vial with BSW.

A Note on the HCG Diet

Please remember that this article does not offer professional medical advice. Before you start any type of diet, you must consult your physician first.

Try Our HCG Mixing Kits

Now that you know the answer to “What is Bacteriostatic Water?”, you can understand what you might inject into your body. Hopefully, this has calmed any fears you have about using our HCG kits.

Here at HCG Supplies, we have several HCG mixing kits. Check them out on this page.

Where to Buy Sterile Water for Injection

sterile water for injection

If you’re not accustomed to injecting yourself, you likely need some guidance.

Many people today are trying the HCG diet, which restricts their food intake to 500 calories as they also take daily HCG injections. If you’re considering taking any form of injection, you’ve probably heard people mention sterile water as an option. What is sterile water, and should it be used for injection?

We’re happy to explain. These tips will teach you everything you should know about using sterile water for injection.

Should You Use Sterile Water for Injection?

Many people shop for sterile water when they need to administer an injection. However, this isn’t the type of water that you should use for injections, because it isn’t advised for use with the HCG diet. Once you open up sterile water it can only be used within 24 hours before running the risk of contamination and infection.

Instead of sterile water, look into bacteriostatic water for your injections. Bacteriostatic water can be used for multiple injections over a 28-day period after opening. This is ideal for HCG diet injections.

How and Where Can You Buy Bacteriostatic Water?

So, what is bacteriostatic water? It’s a type of sterile water that contains small amounts of benzyl alcohol.

If you’re looking to buy bacteriostatic water for the HCG diet or other reasons, you need to know where to find it and how to shop. Here are some points to consider when finding what you need:

Make Sure the Supplier Is Credible and Qualified

When you’re in the market for vials of bacteriostatic water, start by making sure the supplier is professional and credible. You’re trusting them to sell you a product that is exactly as it is labeled and not contaminated by anything else.

There are some laboratories and medical suppliers that can assist you with the purchase, so look for some referrals and recommendations to know what you’re getting.

Shop for Prices and Store Your Bacteriostatic Water Properly

Once you’re ready to purchase some bacteriostatic water, make sure that you look into the prices so you can shop for a vial that’ll serve you well. Look into the amount that you need and compare it with how many injections you’re going to apply on a regular basis.

It’s common for people to purchase bacteriostatic water for their injections in 30mL multi-dose vials. These types of vials let you administer however many doses you need to stay on track with your diet. Bacteriostatic sterile water for injection will help you take your HCG doses effectively, so that you can lose weight and experience the results that you’re looking for.

Find The Bacteriostatic Water That You Need

Having the right bacteriostatic water can help you – especially if you’d like to try the HCG diet. Knowing the difference between bacteriostatic water and sterile water is important and can potentially save you from some health issues.

Make sure that you take the time to search for bacteriostatic water from a company that you trust. We’d be glad to help. For more info on HCG Supplies and to learn more about what we offer, contact us online.

Where to Order Bacteriostatic Water for Mixing Your HCG

Where to Order Bacteriostatic Water for Mixing Your HCG

Picture this: Your doctor just prescribed you with a medication that needs to be reconstituted or diluted with bacteriostatic water to prepare it for injection. You have no idea what bacteriostatic water is and you don’t even know where you can buy it.

Bacteriostatic water is a medical item used as a mixing solvent that is free of a microbial load that contains 0.9% Benzyl Alcohol to prevent the growth of bacteria. This is the case for any medication that needs to be diluted before use just like HCG injections.

Continue reading to learn where to order bacteriostatic water for your medicinal needs.

Find a Reputable Retailer Online

The water directly from your faucet may be contaminated with pathogens. You wouldn’t want to inject this into your body, so you shouldn’t use it to mix concentrated medications. This is where bacteriostatic water comes into play (you have to be sure that you’re buying a high-quality product.

You should look for companies that are dedicated to selling medical supplies. The right online retailer is most likely going to offer fast shipping of their high-quality products.

HCG Supplies is a medical supply depot that has been a dedicated HCG supplier since 2007. We carry all of the items that you might need for HCG injections, including bacteriostatic water. Our HCG economy mixing kit consists of a sterile capped vial, a mixing syringe with needle, alcohol prep pads, and 30ml of bacteriostatic water.

We cannot give medical advice. Be sure to talk to your doctor before starting any new health regimens.

Where to Order Bacteriostatic Water

Now that you know where to order bacteriostatic water, you may be thinking that you could attempt to make your own bacteriostatic water at home. This isn’t a good idea. Bacteriostatic water is meant to be made in a sterile environment.

Contact HCG Supplies today with inquiries on how to purchase your next bacteriostatic water kit. We can also answer any questions you might have on mixing HCG with a solvent to prepare it for use.

Sterile Water vs. Bacteriostatic Water: What Are the Key Differences?

Sterile Water vs. Bacteriostatic Water: What Are the Key Differences?

Contaminated water can contain more than 100 different pathogens. Would you want this water injected directly into your body?

Many drugs or medicines require water to dissolve or dilute the product so it can be absorbed into the body when injected. This is the purpose of sterile water — a type of water free from pathogens. However, few people know about the differences between sterilized water and bacteriostatic water and the different roles they play in administering injections.

To find out more about these types of water, keep reading below.

Properties of Sterile Water

Sterile water is a type of water free from any type of microorganism, including viruses, bacteria, fungi, etc. Not only is it used for injections, but for research experiments as well. Microorganisms in contaminated water can interfere with the experiment and ruin the results.

A common misconception is that boiling water can create sterile water. Although boiling water for 20 minutes may kill most pathogens and be safe to drink, it would not be considered medically sterile for injection.

Additionally, distilled water is not the same as sterile water. Distilled water is created through a process of steaming and condensation, which removes most contaminants, but that does not mean it is free of all pathogens.

What Is Bacteriostatic Water?

Bacteriostatic water is a specific type of sterile water. It has a pH level between 4.5 and 7.0.

The word bacteriostat, or bacteriostatic agent, refers to a chemical or biological substance that inhibits the growth of bacteria by interfering with their reproductive process. This is commonly achieved by adding 0.9% benzyl alcohol.

Anyone with an alcohol allergy should steer clear of bacteriostatic water as an injection solvent.

Bacteriostatic vs. Sterile Water

Sterile water is processed to remove all pathogens and microorganisms. Bacteriostatic water goes one step further than this with the addition of benzyl alcohol. The alcohol, as a bacteriostatic agent, prevents the growth of bacteria.

In contrast, sterile water contains nothing preventing the growth of bacteria once it has been exposed to air. This is why some medical professionals prefer bacteriostatic water for injections. Some professionals also claim that bacteriostatic water provides better solubility for the drug or medicine.

Sterile and Bacteriostatic Similarities

Both sterile water and bacteriostatic water are used as solvents. This means they are designed to be mixed with something. For an injection, they are often mixed with a pharmaceutical drug or medicine.

Using Sterile or Bacteriostatic Water

Access to sterile water or bacteriostatic water is one of the basics of medical hygiene. Of course, all the other equipment used for injection also needs to be sterile. This includes items like needles and the injection site itself.

To find the proper mixing kits needed for injections, take a moment to browse our products.

3 Helpful Tips For Using Bacteriostatic Water Mixing Kits

3 Helpful Tips For Using Bacteriostatic Water Mixing Kits

Losing weight is a challenge that just about everyone struggles with at some time in life. Bacteriostatic water mixing kits are an excellent way to take HCG into your body. You are likely already aware that the bacteriostatic water, in itself, is not the key to weight loss but it is the medium in which to deliver HCG into your body in a safe and convenient way.

That said, using a mixing kit like this still requires that you inject the final mixture into your body, so you want to make sure you get the process right and do not open yourself up to the risk of infection. In this article, we will give you 3 helpful tips for using bacteriostatic water mixing kits, so that you can feel confident in what you’re doing.

1. Use an Alcohol Pad

Bacteriostatic water contains 0.9 percent Benzyl alcohol. The purpose is to ensure the fluid is sterile and safe for your body over multiple doses. We are used to the idea of using alcohol to sterilize and clean our hands, so it should come as no surprise that you should use an alcohol wipe when preparing your mix.

Use the sterile alcohol wipe to clean all the tops of the vials that you will be using. That includes the empty mixing vial, the bacteriostatic water vial, and the HCG vial. Once the mixing process is complete and you have already injected the solution into your body, repeat the cleaning process with another alcohol pad. Remember to clean the injection site on your skin with an alcohol pad before and after the injection too.

Remember to check the expiration dates and that you only have 28 days to use the bacteriostatic water after its first use. Stick to these rules and you should be fine.

2. Pressurize the Vials

This is all about avoiding the creation of a vacuum. It is helpful to note that both your bacteriostatic water vial and your mixing vial are already sealed. That is necessary in order to maintain a sterile environment.

However, if you try to draw a volume from either of these using a mixing syringe that is also sealed it will be very difficult as you have a vacuum present. Therefore you need to introduce air into both vials first.

You can do this by drawing air into your mixing syringe first, and injecting that into the Bacteriostatic Water vial because you will be removing fluid from this vial. The volume of air should equal the volume of fluid you intend to use. Remove an equal amount of air from the empty mixing vial because you will be adding fluid to this vial. Once you’ve properly ‘pressurized’ your vials, you are then ready for the actual mixing stage.

3. Reconstitute and Invert

The trick here is to insert the mixing syringe into the bacteriostatic water and withdraw the volume you intend to use for your solution. Then, using the same syringe inject just enough water into your HCG medication vial. This will reconstitute the HCG.

Next, invert the vial and withdraw the HCG solution back into your mixing syringe. At this stage, your mixing syringe will now contain all of the bacteriostatic water for your solution and the HCG. The final phase is to inject this into your mixing vial which will give you your complete solution ready for injection.

Start Using Bacteriostatic Water

In this article, you’ve read about 3 tips for using bacteriostatic water mixing kits. At first, it may seem a little complicated and even scary. However, with the right hygienic process and following these tips, you will see it is safe, and a highly effective way of delivering HCG into your body.

Once you’ve mastered this process and the HCG Diet, you will soon start to see the benefit of using HCG. You can read more helpful articles about HCG and bacteriostatic water on our site. When you are ready, you can find Bacteriostatic Water online here.

Does Bacteriostatic Water Have Side Effects? Looking at the Pros and Cons

side effects

Are you one of the 1.9 billion adults in the United States that is overweight?

If so, you may be looking into the HCG diet to help you quickly shut off the pounds. One of the most common confusion areas when following the HCG diet is how bacteriostatic water plays an important role in this diet.

That’s why today, we’re going to break down the definition of bacteriostatic water and how it plays a vital role in effective weight loss for following the HCG diet. Keep reading to learn more!

What Is Bacteriostatic Water?

Bacteriostatic water is a type of water used in injections that is developed to inhibit the development and growth of various kinds of bacteria. Also, bacteriostatic water is filtered and sterilized to remove any bacteria. 0.9% benzyl alcohol is mixed with this water to eliminate the possibility of any other bacterial contamination.

Is Bacteriostatic Water Different Than Sterile Water?

Yes, bacteriostatic water is different from sterile water.

Sterile water is filtered and purified while not containing any additives. Sterile water only has one safe way that it can be used; as one single use.

On the other hand, bacteriostatic water can be used in several different techniques, depending on its application. The three main ways that bacteriostatic water can be used are for antiseptics, bacteriostatic preservatives, and as a medication diluent.

Bacteriostatic water has many uses in the medical community, mainly used to dilute or dissolve medications for injection.

While sterile water can be great for some other applications, bacteriostatic water is the most recommended type of water to use to transport the HCG hormone into your body.

Pros and Cons of Bacteriostatic Water

For you to understand why you should opt to use bacteriostatic water and replace sterile water on the HCG diet, you need to understand both of the pros and cons of bacteriostatic water. First, let’s take a closer look at the pros:

Safer to Use

While sterile water is okay to use for mixing a singular dose of the HCG hormone, it isn’t safe to use a multi-dose mixture. This is because sterile water doesn’t have any bacteriostatic properties, meaning that you could risk injecting yourself with harmful bacteria when you’re dosing yourself with HCG using sterile water.

On the other hand, bacteriostatic water won’t have any foreign microorganisms in the solution. Since bacteriostatic water contains benzyl alcohol, microorganisms will not grow in the solution. This is because the benzyl alcohol will end up killing off any microorganisms if they try to grow, keeping the solution safe for you to use for an extended period.

One of the largest cons that come with using bacteriostatic water includes:

Side Effects

Some side effects while using bacteriostatic water may occur. These side effects will depend on if you are allergic to the bacteriostatic water. Some side effects could include:

  • Swelling
  • Fever
  • Redness around the injection site
  • Tenderness around the injection site
  • Tightness in chest

If you experience severe side effects, such as hives, rash, or swelling of your lips, face, tongue, or mouth, you must seek immediate medical attention. This may be a sign that you were going into dangerous anaphylactic shock.

Understanding Why You Should Start Using Bacteriostatic Water for Your HCG Diet Plan

Bacteriostatic water has been carefully treated to ensure that there aren’t any bacteria inside it and that bacteria cannot grow inside it. Using bacteriostatic water over sterile water for your HCG injections will help ensure that you safely inject HCG, preventing potentially exposing yourself to harmful bacteria.

Are you interested in learning more about how the HCG diet can help you to lose weight? We are here to help you with your health and wellness journey. Click here to learn more about the HCG diet today!

When you are ready to purchase Bacteriostatic Water just look here.

What Are the Differences Between Sterile Water vs Bacteriostatic Water?

What is bacteriostatic water

If you administer daily injections, you will need to choose which water to use for the injections. There are times when you need sterile water and times where you need bacteriostatic water.

So, what’s the difference between sterile water vs bacteriostatic water? If you’re curious then you’ve come to the right place!

Safely Administering Injections

There are many instances when you need to administer injections: it’s your profession, research studies, administering medication, or when you’re on a diet like the HCG diet. This is an effective low-calorie plan that helps you lose weight by injecting HCG hormone.

Injections need to be administered carefully and safely. This includes choosing the right solvent for injecting and diluting your desired medication. Let’s dive into the differences between sterile water and bacteriostatic water.

Sterile Water vs Bacteriostatic Water

The most important thing to know is that sterile water and bacteriostatic water are both sterile. The major difference is that sterile water doesn’t contain a bacteriostatic agent. This means you should discard them after a single usage. Bacteriostatic water can be used for multiple injections for up to 28 days after dilution.

What’s Sterile Water?

Sterile water is water (H20) that has no additives, preserves, and is free from foreign substances (germs, bacteria, and debris). Since it can’t transfer pathogens, it’s often used in the medical industry.

Once you open a vial of sterile water, you must discard it after a single use. There are not many known negative side effects of this type of water. Although, in rare cases, some people experience allergic reactions, fever, or redness. If that’s the case, you should contact your doctor!

What’s Bacteriostatic Water?

Bacteriostatic water, on the other hand, is sterilized water that contains 0.9% benzyl alcohol that’s typically used to dilute medications to the desired consistency for an injection. The container of water can be used multiple times (by a sterile needle). This is made possible by the benzyl alcohol that ensures that no bacteria grows in the water (for up to 28 days).

This type of water is ideal for injections, and this also applies to HCG diet mixing applications. Keep in mind that you should never use bacteriostatic water as a standalone product. You should use it as a solvent, which means to mix it with other medications like HCG hormone.

There are little known side effects. If there are, they are more likely related to the medication in the water. If you experience any discomfort, then contact your doctor!

Is One Better Than the Other?

When looking at sterile water vs bacteriostatic water, there may be a winner.

In most cases, bacteriostatic water is the better choice for diluting medication. This is because it offers better solubility. It’s a safe, efficient, and cost-effective choice for HCG or any other type of medication via the IV, IM, or SC route.

There’s one last thing! You can’t replace one type of water with the other without doing proper research and testing. They are not the same thing and will have different effects.

We want to help you with all your HCG supply needs. Buy bacteriostatic water today and learn more about the HCG diet.

Bacteriostatic Water for Injection: 5 Important Things to Know

hcg mixing water

Do you need to give daily injections to yourself, a loved one, or a research study? You want to perform this important task with the utmost care.

This means choosing the right solvent for diluting and injecting the medication. With a plethora of potential agents, bacteriostatic water is the most desirable for HCG diet mixing applications.

Many health professionals choose bacteriostatic water for injection. Read on to learn important information about this type of injectable water.

What Is Bacteriostatic Water?

Like sterile water, bacteriostatic water contains no microbial agents. What makes it different?

When comparing bacteriostatic water vs. sterile water, you will find that bacteriostatic contains a small amount (0.9%) of benzyl alcohol. This chemical does not allow for the growth of bacteria, fungi, or other micro-organisms that can invade the solution and the body.

Uses for Bacteriostatic Water

When administering medications, you may wonder about the options for using bacteriostatic water. Always follow the instructions the manufacturer provides with your medication.

This type of injectable water can be used for administering substances, like HCG solution, intramuscularly or subcutaneously. You may also administer some medications intravenously with bacteriostatic water.

Low Cost

When looking for a longterm solution to a health condition, cost will most definitely come into consideration. While you may not get much choice in the cost of the medication, you can pick cheaper solvents.

Bacteriostatic water carries a low cost in comparison to other solvents. This is because it is easy and inexpensive to manufacture.

Reusable

Most solvents require you to discard them after a single use. This is because once anything touches the liquid, it loses sterility and microbes can grow. These microbes carry the potential to infect your body and make you sick.

Due to the bacteriostatic nature of this water, you can reuse the solvent until you finish the vial or up to 28 days, whichever comes first. This cuts down on cost and product waste.

Long Shelf Life

Many solvents do not last long once opened. For instance, saline solution gets discarded after only a day of breaking the seal. Bacteriostatic water, however, lasts much longer (up to 28 days), making it more likely to use everything you buy.

With most solvents, the reason for the shelf life is to prevent microbial contamination. Without that possibility when using bacteriostatic water, you only need to worry about the benzyl alcohol eventually losing its effectiveness. After opening the container, you should use it in under a month. Also, be sure to check the expiration date on your container. The self life is usually about a year or a bit more before opening.

Bacteriostatic Water Mixes Well

Whenever you mix in a solvent with your medication, you need to consider possible chemical interactions. Sometimes, perfectly safe solvents interact with other chemicals to create a dangerous solution in your body.

Fortunately, benzyl alcohol is not highly reactive. You can use it with a wide range of medications.

Get Your Bacteriostatic Water for Injection

Whether you need HCG or another type of medication via IV, IM, or SC route, you want something safe, efficient, and cost effective. This is why you should choose bacteriostatic water for injection.

We want to help you with all of your HCG supply needs! Buy your bacteriostatic water today!

What Is Bacteriostatic Water? The Complete Guide to Bacteriostatic Water

What is bacteriostatic water

Weight loss is a struggle for people of all sizes. Whether you’re looking to shed a few pounds or looking to have a full-body transformation, it’s a difficult process.

The process is so difficult that it can lead people to try quick fixes without doing the appropriate research.

One quick fix that does work is HCG when paired with bacteriostatic water, but have you ever wondered what the accompanying component really is?

We’re here to help!

Keep reading to learn what is bacteriostatic water and how it can help you on your weight loss journey.

What Is Bacteriostatic Water?

Bacteriostatic water is sterile water that contains 0.9% benzyl alcohol. The purpose of this water is to dilute or dissolve medications. Stored in a 30 mL vial, it’s meant for injections.

It has a long shelf-life if unopened and stored between 60 to 77 degrees Fahrenheit. However, once the vial is opened, it is only good for 28 days.

One way to put your vial to use is by using it to administer HCG. When paired together, they help users experience rapid weight loss while following the HCG diet.

How It’s Used With HCG

In short, HCG is meant to be mixed with bacteriostatic water before being administered.

There are ways in which to mix bacteriostatic with HCG.

The process begins with the use of a vial of bacteriostatic water and using a mixing needle along with a syringe. Take the amount of water recommended and mix it with the powdered HCG. The economy HCG Mixing kit is ideal for this process. Once complete, mix until dissolved and transfer to an empty sterile vial.

Are There Any Side Effects?

Bacteriostatic water is safe for use with most drugs, and there are very few side effects associated with it.

However, in the rare instance that someone is allergic or has a negative experience with it, here’s what they can expect:

  • fever
  • tissue death
  • abscess
  • infection
  • blot clot

Weight loss and Bacteriostatic Water

Bacteriostatic water is a harmless component used to help administer medications through injections. The side effects are both rare and overall, non-life-threatening.

It’s important to recognize that bacteriostatic water by itself won’t do anything to help you achieve your weight loss goals. Even though weight loss is not a direct result of its use, it can occur when used with the right medication.

When paired correctly with HCG and the HCG Diet protocol, it makes for an effective weight loss system.

But even when used properly, it is not meant to be a replacement for hard work and should be accompanied by an HCG approved diet to see any results.

We hope this proved to be a helpful guide in breaking down what is bacteriostatic water!

Still have more questions about bacteriostatic water or HCG? Check out our blog for more articles and helpful tips!

WE ARE NOT DOCTORS. HCGSupplies.com and it’s blog (site.hcgsupplies.com/blog) does not offer or provide medical advice. All statements are for informational/entertainment purposes only and are the opinions of the blog author. If you have questions about your health and/or your medications, please contact a medical professional.